The KGC-1 converts a 240 Volt sensing transfer switch to a 2 wire start transfer.
The interface provides the necessary voltage sensing, timing functions and switching circuits required for automatic operation .This allows a 2 wire start generator to be installed without having to change the transfer switch or wiring between the transfer switch
When utility power fails, the KGC-1 will pause for 5 seconds to ensure an actual power outage has occurred. The KGC-1 will then initiate a 2 wire generator start signal, starting up the generator .After a 15 second warm up period the KGC-1 will confirm generator voltage is within acceptable levels and will then output he generator transfer signal. When utility power is restored and remains stable for more than 2 minutes the controller will automatically transfer the load back to utility and signals the generator to turn off after cool down.